One device is suitable for a range of different fan types. It also provides an easy way to measure flow rate in a duct system for example together with a FloXactTM averaging measurement probe.
The DPT-Flow-Batt is an on-site display designed for air handling units to measure the air flow on centrifugal fans.
The DPT-Flow-Batt can also be used in the duct system as an on-site display for flow. The device can be used with several different measurement probes such as FloXactTM or pitot tube, and air dampers. The requirement is that the K-value of the measurement probe or damper is known.
|Accuracy (from FS):||±1.5 % (Including: general accuracy, temperature drift, linearity, hysteresis, long term stability, and repetition error)|
|Zero point calibration:||by pushbutton|
|Measuring units:||Pressure: Pa, kPa, mbar, inchWC, mmWC, psi
Flow: m3/s, m3/hr, cfm, l/s, m/s, ft/min
|Supply voltage:||9 V battery|
|Current consumption:||~20 mA on active mode|
|Operating temperature:||-10…+50 °C|
|Response time:||1.0−10 s, selectable via menu|