PTL

Pressure transmitters for liquids

PTL series pressure transmitters are used for pressure detection in liquids in heating and cooling systems.

 

PTL-Heat is used for pressure detection in non-condensing applications such as district heating or heat recovery systems, whereas PTL-Cool is designed for extreme conditions where condensation is a common problem. PTL-Cool has a two-layer protection for electronics. This is why the possible condensation does not harm the product.

 

PTL series products are also suitable for refrigerants and non-aggressive gases.

 

PTL-Heat series devices are commonly used in HVAC/R systems for:
• District heating
• Liquid heat exchangers
• Heating substation
• Air compressor systems

 

PTL-Cool series devices are commonly used in HVAC/R systems for:
• District cooling
• Fan coil units (FCU)
• Chilled beams

Technical details PTL-Cool

Accuracy (from FS): ±1.0 %
Supply voltage: 15...24 VDC/VAC
Output signal: 0...10 V or 4...20 mA
Protection standard: IP65, two-layer protection against condensation
Pressure connector: inside thread G1/4”
Ambient temperature: -40...60 °C
Temperature of medium: -40...50 °C

Technical details PTL-Heat

Accuracy (from FS): ±1.0 %
Supply voltage: 15...24 VDC/VAC
Output signal: 0...10 V or 4...20 mA
Protection standard: IP65, one-layer protection
Pressure connector: inside thread G1/4”
Ambient temperature: 0...105 °C, non-condensing
Temperature of medium: 0...125 °C

PTL

Example
PTL-Heat-4-V

Model

Product series

PTL
Pressure transmitters for liquids
PTL

Application

-Heat
For heating applications
-Cool
For cooling applications
-Heat

Measuring range (bar)

-4
0...4 (PTL-Cool only on request)
-6
0...6
-10
0...10
-16
0...16 (PTL-Cool only on request)
-25
0...25 (PTL-Cool only on request)
-4

Output

-V
Voltage
-A
Current (2-wire)
-V

Other Pressure transmitters for liquids: