DPT-Ctrl-2SP

DPT-Ctrl-2SP is designed for simple systems to control constant pressure or air flow of fans, VAV systems or dampers. The device has a binary input to select between two user-adjustable setpoints. When controlling air flow, it is possible to select a fan manufacturer or a common measuring probe that has a K-value. The device also includes a temperature sensor input which enables compensation of flow or pressure according to for example outside temperature.

DPT-Ctrl-2SP can be used to control air flow or constant pressure in applications where it is important to keep a constant vacuum or steady air flow. Energy savings and optimal indoor air quality can be achieved because of the two setpoints and the outdoor temperature compensation feature of the device. The desired setpoint can be selected, for example, with weekly clock, turn switch or key card switch.

Available in 2018!

Technical details

Accuracy (from applied pressure):
(model 2500)
Pressure < 125 Pa = 1 % + ±2 Pa
Pressure > 125 Pa = 1 % + ±1 Pa
Measuring units: Pressure: Pa, kPa, mbar, inchWC, mmWC, psi
Flow: m3/s, m3/h, cfm, l/s, m/s, ft/min
Measuring element: MEMS, no flow-through
Control signal: 0…10 VDC
PID-parameters: Adjustable via menu
Zero point calibration: by pushbutton
Supply voltage: 24 VDC ±10 % / 24 VAC ±10 %
Power consumption: < 1.0 W
Operating temperature: -20…+50 °C
Protection standard: IP54

DPT-Ctrl-2SP

Example
DPT-Ctrl-2SP-2500-D

Model

Product series

DPT-Ctrl
Pressure and flow controller
DPT-Ctrl

Model type

-2SP
Two setpoints (switchable via binary input)
-2SP

Measuring ranges (Pa)

-2500
-250...2500
-2500

Display

-D
With display
-D

Other Pressure and flow controllers: